BATCH CONTROLLERS

BATCH CONTROLLERS

BATCH CONTROLLERS FOR WEIGHING EQUIPMENT IN AUSTRALIA


Here at Weigh-More Solutions, we appreciate that correct weighing is not just an option for our clients. Where weight equals money and owners/drivers of overweight trucks are readily financially penalised, accurate weighing equipment is a business prerequisite. Reliable and versatile batch controllers are one more component that will ensure that your trucks are correctly and legally loaded.

If you need the functionality of a batch controller with batching adjustment, recipe memory, and a whole host of other special functions, you need one of the Weigh-More Solutions ranges of batch controllers. With leading-edge technology and rugged construction as standard, you can rest assured that our batch controllers will keep on performing even under pressure.


WMS "CPWE" BATCH CONTROLLER 

wms 5100

Multifunctional microcontroller/ weight indicator for use in industrial systems. 16 outputs and 8 digital inputs, 3 RS232/RS485 serial outputs, 16 bit analogue output, Sysway transmission protocols and RTU Modbus are some of the features of this indicator, which, added to the range of available application software programs, allow the use in dosage and weight verification applications, with direct management of the automation. CE-M approvable (OIML R-76 / EN 45501). 
Email Us
KEY FEATURES:

•Waterproof 25-key numerical functional keyboardcodes, 
•Programmable function key
•Easy to consult backlit graphic LCD displa
•Anodised aluminium case 
•IP65 front panel protection, against dust and water sprays. 
•Real time clock and permanent data memory. 
•Integrated alibi memory for CE-M communication with PC and printer. 
•Calibration and Set-Up parameters
•Up to 1.000.000d displayable for internal factory use. 
•Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in approved version for CE-M legal for trade use.
•Up to 8 signal linearisation points with DINITOOLS. 
•Internal resolution of up to 3.000.000 points. 
•A/D 24 bit sigma-delta 4-channel conversion, up to 3200 conv./sec. with automatic selection.
•Connectable with up to 16 analogue load cells with 350 Ohm input resistance (45 1000 Ohm cells) and to the main digital load cells available on the market.
•Management of a weighing system with digital equalisation of the 4 cells or management of up to 4 independent weighing systems (depending on the application software).
•Power supply: from 8Vdc to 40Vdc and, upon request, 100-240Vac (with the ALSW optional external power supplier).
•Operating temperature: from -10 to +40°C. 
•Connectable to printers and labellers through the available command drivers.


WMS "CPWET" BATCH CONTROLLER 

wms 5100

High performance digital weight indicator with programmable inputs and outputs, fitted with 3 serial ports, transmissions protocols for data communication, completely programmable printouts, graphic display and input for included bar code/badge reader. The wide range of connectable accessories and printers guarantees the maximum interfaceability and versatility. CE-M approvable (OIML R-76 / EN 45501). 
Email Us
KEY FEATURES:

Waterproof 25-key numerical functional keyboard.
•Programmable function keys
•Easy to consult backlit graphic LCD display. 
•Fitted with 3-way control light made up to sinoptic bar-graph with 3 groups of 3 Leds each, to tollerance check and setpoint.
•IP68 stainless steel waterproof case
•Dimensions, including support bracket: 269x58,8x183mm.
•Suitable for use on the table, or wall.
•Real time clock and permanent data memory. 
•Integrated alibi memory for CE-M communication with PC and printer. 
•Functions available with DINITOOLS utility
- Configuration, calibration, data entry and print formatting.
- Recording and filing of all the information on PC.
- Complete retrieval of the data saved for quick substitution
- Instrument calibration with numeric values.
•Selection of the programme language directly in the set-up.
•A/D 24 bit sigma-delta 4-channel conversion, up to 3200 conv./sec. with automatic selection. Filtering system through programmable software, adjustable according to the system.
•Calibration and Set-Up parameters, configurable from PC with Dinitools or with the keyboard; theoretical calibration with the entry of the characteristics of the load cells. 
•Up to 1.000.000d displayable for internal factory use. 
•Up to 10.000e or multirange 3 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
•Up to 8 signal linearisation points with DINITOOLS. 
•Internal resolution of up to 3.000.000 points. 
•12 Vdc power supply with external power adapter.
•Management of a weighing system with digital equalisation of the 4 cells or management of up to 4 independent weighing systems (depending on the application software).
•Connectable with up to 16 analogue load cells with 350 Ohm input resistance (45 1000 Ohm cells) and to the main digital load cells available on the market.
•Connectable to printers and labellers through the available command drivers.

DGTP: PANEL DIGITAL WEIGHT TRANSMITTER/INDICATOR

wms 5100
Multipurpose weight transmitter for panel mounting. Ideal as a microcontroller in industrial weighing and dosage systems making an easier and safer integration of the weighing to any automation system. Fitted with 4 inputs and 6 outputs, programmable. Wide range of available interfaces.
Email Us
KEY FEATURES:

•Easy to use 5-key waterproof keyboard. 
•Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
•Case for panel mounting. Dimensions: 143,5 x 72 x 129mm(lxhxw). Drill template: 136,5 x 67,5 x 120mm (lxhxw).
•A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
•Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
•Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
•Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
•Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
•Up to 8 signal linearization points with DINITOOLS (3 from keypad).
•Fitted real time clock.
•From 12 Vdc to 24 Vdc power supply.







DGT: 4-CHANNEL DIGITAL WEIGHT TRANSMITTER/INDICATOR

wms 5100

Multipurpose weight transmitter for panel mounting on DIN bar.Ideal as an independent or dependent 4-channel digital junction box, permitting the direct reading and diagnostics of each connected load cell. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system. CE-M approvable (OIML R-76 / EN 45501).
Email Us
KEY FEATURES:

•Easy to use 5-key waterproof keyboard. 
•Highly efficient red LED display with 6 10-mm digits and 6 LEDs for showing active functions.
•Case for mounting on DIN bar or on the wall.
•Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
•Up to 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
•Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
•Up to 8 signal linearization points with DINITOOLS (3 from keypad).
•A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
•Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
•Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
•From 12 Vdc to 24 Vdc power supply.

DGTPK: DIGITAL WEIGHT TRANSMITTER/INDICATOR WITH EXTENDED KEYBOARD

wms 5100

Multifunction weight transmitter for table or panel mounting. Ideal as a microcontroller in industrial weighing and dosage systems, making an easier and safer integration of the weighing to any automation system. Fitted with 4 inputs and 6 outputs, programmable. Numerical keyboard for the quick entry of the setpoint and the tare.
Email Us
KEY FEATURES:

•20-key numeric/functional waterproof keyboard: quick entry of the setpoints and the tare value. 
•Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
•Case for panel mounting. Front panel dimensions: 170x170mm.
•Drill template: 161x162mm.
•Fitted with bracket for use on table or wall mounting. A/D 24-bit sigma-delta conversion, up to 200 conv./sec. autoselect.
•Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
•Up to 1.000.000 displayable divisions with internal resolution up to 3.000.000 points.
•Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
•Calibration, Set-Up parameters, configurable from keyboard or from PC with DINITOOLS.
•Up to 8 signal linearization points with DINITOOLS (3 from keypad).
•Time/Date
•From 12 Vdc to 24 Vdc power supply.




Share by: